We A1 dead Flash File 100% Tested Firmware.date
MT6572__WE__WE_A1__A1__5.1__ALPS.L1.MP6.V1_KEYTAK6572.WET.L_P4simtechnologybangladesh.blogspot.com
welcome to our site
YES This is tha Right place for your targeted mobile phone flash files resource.
Please following button area & get your flash file using our passwords
Thanks for choosing US & All the best.
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Waiting for USB Port...
Set MediaTek DA USB VCOM Port (COM5)
Reading preloader...
Reading mbr...
Reading ebr1...
Reading pro_info...
Reading nvram...
Reading protect_f...
Reading protect_s...
Reading seccfg...
Reading uboot...
Reading bootimg...
Reading recovery...
Reading sec_ro...
Reading misc...
Reading frp...
Reading logo...
Reading expdb...
Reading android...
Reading cache...
Reading usrdata...
Saving as scatter file...
Done!
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM3)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
id:N403-BD-WE-V1.4_20160511
version:5.1
model:WE A1
brand:WE
manufacturer:WE
PRELOADER BaseAddr:0x0 Size:0x1400000
MBR BaseAddr:0x1400000 Size:0x80000
EBR1 BaseAddr:0x1480000 Size:0x80000
PRO_INFO BaseAddr:0x1500000 Size:0x300000
NVRAM BaseAddr:0x1800000 Size:0x500000
PROTECT_F BaseAddr:0x1D00000 Size:0xA00000
PROTECT_S BaseAddr:0x2700000 Size:0xA00000
SECCFG BaseAddr:0x3100000 Size:0x20000
UBOOT BaseAddr:0x3120000 Size:0x60000
BOOTIMG BaseAddr:0x3180000 Size:0x600000
RECOVERY BaseAddr:0x3780000 Size:0x600000
SEC_RO BaseAddr:0x3D80000 Size:0x40000
MISC BaseAddr:0x3DC0000 Size:0x80000
FRP BaseAddr:0x3E40000 Size:0x100000
LOGO BaseAddr:0x3F40000 Size:0x300000
EXPDB BaseAddr:0x4240000 Size:0xA00000
ANDROID BaseAddr:0x4C40000 Size:0x5DC00000
CACHE BaseAddr:0x62840000 Size:0xF000000
USRDATA BaseAddr:0x71840000 Size:0x76B40000
BMTPOOL BaseAddr:0xFFFF0000 Size:0x1500000
BaseAddr:0x0 Size:0x0
>>Done.
How to Flash Firmware
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*]Take
a Backup of your personal data before flashing or installing the
firmware on your smartphone. As this helps you to recover the personal
data whenever any thing wrong happens.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*]Take
a Backup of your personal data before flashing or installing the
firmware on your smartphone. As this helps you to recover the personal
data whenever any thing wrong happens.
No comments:
Post a Comment